EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE

EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Demand Controller is actually a really effective solar controller made for off-grid photo voltaic devices. Based upon multiphase synchronous rectification technology, it ensures optimized Power conversion and program balance for an array of photovoltaic (PV) programs.

Critical Options of your EPEVER Tracer AN Collection Controller
The Tracer AN collection utilizes EPEVER Solar Cost Controller technologies for superior solar Vitality harvesting. Critical capabilities incorporate:

Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
State-of-the-art MPPT Algorithm with >ninety nine% effectiveness.
Twin-Phase Charging for Increased battery lifestyle.
Liquid crystal display Exhibit with real-time facts monitoring.
A number of Load Command Modes including handbook and timer.
In depth Digital Protections towards overcharging, more than-discharging, short circuits, and reverse polarity.
Phase-by-Action Guidebook to Putting together the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Assure all components are integrated: Tracer AN device, temperature sensor, conversation cables, and person guide.
Verify the model amount and voltage scores match your solar panel and battery requirements.
two. Mounting the Demand Controller
Find a perfectly-ventilated, dry locale close to the battery lender.
Protected the Tracer AN controller using the delivered mounting brackets.
Manage appropriate clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Usually observe right protection protocols and make sure the technique is driven off prior to connecting components.

Move one: Link the battery terminals towards the charge controller (good to good, destructive to detrimental).
Phase 2: Join the solar panel array towards the PV input terminals.
Move three: Join the load terminals if employing a direct load relationship.
Move four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Electric power about the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, mild Command.
5. Monitoring and Facts Logging
The Tracer AN Series supports serious-time monitoring using the MT50 distant meter.
Knowledge may be logged by means of the RS485 conversation port using application including Solar Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Popular Concerns
Concern one: No Electrical power Output

Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Challenge two: Above-Voltage Defense

Validate the solar array’s voltage ranking.
Change program parameters if essential.
Situation three: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT settings within the menu.
Benefits of the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification technological know-how assures:

Larger Performance: Lowered Electrical power losses in the course of conversion.
Increased Dependability: Secure efficiency less than variable loads.
Extended Battery Lifestyle: Regular and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is definitely an Fantastic choice for optimizing solar Read more power era and increasing battery existence. By pursuing the above setup information, buyers can make certain utmost performance and method longevity.